GLS Audio 4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs. TECHNICAL DATA Electrical Rated current/contact: 30 A rms continous, 40 A rms 1 min. Dielectric strength: 4kV peak Rated voltage: 250 V ac Contact resistance: = 3 m (= 10 m for NL4MD-H) after 5000 insertion-withdrawal operations Insulation resistance - initial: > 2 G - after damp heat test: > 1 G Inrush/outrush current capability (12 V source): 300/30 A/200 ms Creepage distance: according to IEC 664-1 Mechanical - Chassis: flat tabs for FASTON 0.187" x 0.02" (4.8 mm x 0.5 mm) Solderability complies with IEC 68-2-20 Materials Contacts: Female: CuZn39Pb3 Male: CuSn8, 4 µm Ag plated Housing: PA 6 30% GR Metal insert: Ck67 Temperature range: -30°C to +80°C Flammability: UL94HB WIRING AmplifierStereo ("HIFI"): one NL4MP socket left channel tabs 1+/1- right channel tabs 2+/2-Power ("PA) Standard: three NL4MP sockets "A" socket: left channel tabs 1+/1- "B" socket: right channel tabs 1+/1-Bridged mono: "M" socket: left channel tabs 1+/1- right channel tabs 2+/2-BI-Amp: one NL4MP socket low frequency tabs 1+/1- high frequency tabs 2+/2- Cable Stereo ("HIFI"): NL4FC on amplifier end, four conductor cable splits into two pairs with NL4FC on each end Power ("PA) Standard: a two-conductor cable for each channel with NL4FC on both ends Bridged mono: a special two-conductor cable, on both ends wired to pin 1+/2+ of NL4FC BI-Amp: a four-conductor cable on both ends wired to pins 1+/1-, 2+/2- of NL4FC Speaker Stereo ("HIFI"): one NL4MP per speaker left speaker pins 1+/1- right speaker pins 2+/2- Power ("PA) Standard: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-" Bridged mono: NL4MP pin 1+ to speaker coil "+" NL4MP pins 1- and 2+ to speaker coil "-" BI-Amp: one NL4MP socket low frequency pins 1+/1- high frequency pins 2+/2-