GLS Audio 1/4" Heavy Duty Plug Right Angle Male Connector Mono TS - 10 Pack

These soldered fine. Used with lava tightrope and signal stayed strong. Just be careful bending the tabs in. They can cut through to the center conductor and short out the cable. Ohm meter test will indicate this. GLS had best price I could find on this style connector of this quality. Just wish the tab edges weren't so sharp. Minor complaint.

Very nice jacks. They look to be the same angle jacks that are on the Livewire cables. Very good quality.

Even thought the pictures looked great, I was expecting something of cheap quality. I was shocked at the high quality of these plugs. They are just as good as the Switchcraft versions, but Switchcraft cost 5 times as much. I'm a big fan of GLS now!

I lead a band with multiple keyboards, guitars, bass, mic'd drums, etc. I try to keep instrument and mic cable lengths to a minimum, to maximize audio quality and minimize stage clutter. I also build a lot of guitar pedal boards. GLS connectors are reasonably priced but high quality, with subtle improvements over competitive products that make cable building a breeze. Orange County Speaker is the place to go for any audio cabling needs. Their customer service, product selection and delivery can't be beat.

I've order these connectors before and they are simply awesome! They are just as good as the much more expensive Switchcraft brand. They appear to be the same connector most cable companies use when you buy cables at retailers like Guitar Center. I just wish I could afford to buy in higher quantities to get the price even lower!

Thick and easily solders.

I work with these plugs every week, building high quality patch cables. The big names can't touch the solidness and compact size, and these are a real bargain besides. They are easy to work with, solder easily and the contacts are kept well apart. Rock solid.

These are almost as good as the Switchcraft version at a much lower price point. The head is a one piece cast design instead of multi-part which isn't really an issue. My main problem with them is the plastic insert in the middle of the two lugs. It makes it difficult to get the wire clipped in place and soldered. I really couldn't use my heatsinks like I normally do. Otherwise, they seem like they'll hold up just fine.

These are just as good as Switchcraft stuff. Very well made. I have full confidence these will work great, unlike my George L's....

I was a little nervous ordering products from a place I haven't ordered from before. I took a chance because the prices and shipping were basically the best I could find without taking a chance from some Chinese seller. I ordered 50 of these and they arrived sooner than the estimated delivery date which is awesome! The plugs: The plugs are lighter weight then the Switchcraft plugs I've used on the past but these plugs are a 1/3 the price! I've been using these to build 6 patch cables for pedal boards using Lava Cable ELC low capacitance instrument cable and they're turning out excellent. My 2 complaints: 1. One of the plugs (out of 50) had the larger .375 opening. This wasn't really a problem for me and I actually went through the other 49 looking for one more because I have some of the Lava Cable Ultramific cable that needs the .375 plugs. It'd be cool if Orange County Speaker got some of these larger plugs in, I'd buy them. 2. They aren't offered in a 50 or 100 pack like the straight plugs and pancake plugs also listed on there site. Not a big deal at all though. I'll be ordering some of the pancake plugs to build patch cables out of the Lava Cable mini-ELC cable I have. I'm looking forward to ordering more products from this company!